German Light Products GT-1, Руководство пользователя

Страница: 20 / 40

www.glp.de
20
GT-1 User Manual
5. Connections
Power
The GT-1 provides a 3-conductor, 20 A Neutrik powerCON socket for connection to AC
power. The autosensing power supply accepts 100-240 V, 50/60 Hz AC power. Do not
connect the fixture to any other voltage or an external dimmer.
To prevent arcing at the power connection, turn the power switch off before
connecting or disconnecting a live power cable. Check that the head is unlocked
before turning the fixture on.
The main fuse is located in a fuseholder in the base.
WARNING! Disconnect the fixture from the mains supply before replacing the fuse.
Replace only with fuse of the specified type.
Control Data
The GT-1 provides both 3-pin and 5-pin XLR input/output sockets for connection to a
USITT DMX-512 Standard data link. Use only one input and one output socket. The pin
connections are Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+]. Pins 4 & 5 on the 5-pin sockets
have no contact. Both DMX inputs are connected to both DMX outputs.
The fixture is ACN ready and provides a Neutrik RJ-45 socket for connection to an Art-
Net II-compatible Ethernet network.
Starting and stopping operation
To start or stop operation, move the power switch to the “I” (on) or “O” (off) position.
Figure 10. Connections