German Light Products GT-1, Руководство пользователя

Страница: 17 / 40

German Light Products
®
GT-1 User Manual
17
Accessories are available to mount the GT-1 in various positions. These fasten to the
connectors on the base.
Mounting upright on a level surface
For upright installation on a stable horizontal surface, fasten
the floor stand shipped with the fixture to the base. See
drawings on right and below. The floor stand mounts to the
base with two Camlock quarter-turn pins. Line up and insert
the pins into the base and turn 90° clockwise to lock.
See drawing below. Eyelets are provided on both sides of the
floor stand. If there is any danger that the fixture may fall over,
pass a ratchet strap through the eyelets and fasten to a
suitable anchoring point.
Securing the fixture with a safety cable
In any location where the fixture can cause injury or damage if it falls, secure it with a
safety cable that is approved as a secondary attachment for the weight of the fixture.
To secure the fixture with a safety cable:
See illustration on right. Pass the safety
cable through one of the two safety
attachment eyes (arrowed) in the base of
the fixture.
Pass the safety cable through or around
the truss or supporting structure and take
up as much slack as possible before
closing the safety cable.
Check that the safety cable will catch the
fixture safely if a primary attachment fails.
Strap eyelet
M10
Gewinde
Camlock Camlock
thread
Figure 6. Upright Mounting Details
Camlock pin
Figure 7. Safety attachment eye