Chapter 6
104
Printer Maintenance
P83173A RevA
7/19/10
♦
When you choose
Yes
, use the
Y
or
Z
keys to select the next color and repeat
the process above as for the first color.
♦
When all colors are cleared, choose
No
, and continue with the next step below.
16
When all line clearing is complete, the system prompts you to
Clean the Purge Block. Press
ENTER when done.
Moisten a swab by applying 1 drop per side of Daily Maintenance
Solution to clean the purge block, which is located directly under the purge valves. Be
sure to swab the entire underside, not just the outer edge. Do this to remove any
remaining ink and prevent it from dripping during printing and/or curing on the
Purge Block. Press ENTER when done.
17
Dispose of used swab according to state and local laws and regulations.
18
The printer begins automatic maintenance of the ink delivery system. This process
takes a few minutes and a progress bar displays.
19
When finished, the system prompts you to
Replace Head Access Door.
20
After the head access door is installed the screen prompts you to
Lower shelf and swab
printheads
.
21
Lower the Maintenance Shelf by pushing down in the middle of the shelf. Do not push
on either end of the shelf as it causes the shelf to twist.
22
Place 3-5
drops of Daily Maintenance Solution onto a new Anticon-covered swab.
Yes
No
Another Color?
After purging, use a Daily
Maintenance Solution-moistened
swab to wipe the Purge Block
directly under the valves.
