Instructions for Use
Bodystik
Serial no.: xx|8|301|yyy and 2301xxxxx
Page 86
Version: 7 | Release date: 02. August 2021
When using a disinfectant that has not been tested and
approved by the manufacturer, the following steps must be
observed:
•
Preferably use agents that correspond in composition to
the approved agents. The composition is available on
data sheets, which we can provide on request.
•
Check bactericidal and virucidal effect suitable for the
intended use.
•
Use only disinfectants listed in public databases (e.g.
RKI)
•
Check data sheet for material compatibility with plastics
(especially polyoxymethylene, polystyrene, acrylonitrile
butadiene styrene, Makrolon
®
) as well as metal
•
First test the disinfectant for material compatibility in an
inconspicuous place.
•
During the regular visual inspection for damage, also
pay attention to material changes (discoloration, cracks,
embrittlement...)
•
Observe long-term trend of calibrations for changes in
measuring function
The manufacturer accepts no liability for any resulting equipment
damage or any consequential damage caused by the use of
disinfectants that have not been tested and approved by the
manufacturer.
