Instructions for Use
Bodystik
Serial no.: xx|8|301|yyy and 2301xxxxx
Page 46
Version: 7 | Release date: 02. August 2021
4.1.3.4
Pressure Reducer (optional with Extension „Diffusion Measurement“)
The Bodystik provides the option of extension for CO Diffusion
measurement. A suitable pressure reducer for the Diffusion gas
bottle is required for safe application.
If you are planning the extension with Diffusion measurement,
please note:
Danger to life.
Reason: Poisoning by carbon monoxide (CO) during
prolonged exposure. Therefore:
•
Arrange the pressure reducer so that it is
easily accessible to enable the gas supply to
be quickly interrupted in the event of leakage!
Reason: damage to the CO Analyzer
because of excessive working pressure on the
demand valve. Therefore:
•
Only use a pressure reducer that complies
with the specifications defined by the
manufacturer and provides a fixed outlet
pressure of 5 bar!
A suitable pressure reducer has been approved by the
manufacturer and is recommended for use. You can receive
this from your authorised specialist retail partner.
•
See also chap. 2.2.1 "Original Spare Parts /
Accessories / Optional Expansions". \ 2.2.1.2
Depending on the regulations in the country of use, similar
pressure reducers may be considered. The inspection and
maintenance intervals specified in the operating instructions of
the pressure reducer used must be observed.
For a complete explanation of the optional diffusion
measurement with the “Add-On CO Diffusion”,
please refer to the separate IFU Add-on CO Diffusion
