Gentex HGU-56/P, Инструкция по эксплуатации и обслуживанию

Страница: 56 / 86

NOTE: Removing the energy-absorbing liner may require some practice.
5. Referring to Figure 3-7 , use a spatula to separate the hook-and-pile fasteners attaching the
energy-absorbing liner to the helmet shell. Following the contour of the helmet shell,
carefully slide the energy-absorbing liner out of the helmet.
Installation
1. Position the front of the energy-absorbing liner at the rear of the helmet between the nape
strap pad assembly and the helmet shell.
2. Following the contour of the helmet shell, slide the energy-absorbing liner into the helmet.
Attach the pile fasteners on the energy-absorbing liner to the hook fasteners on the inside of
the helmet shell. Ensure front edge of liner is aligned with front edge of helmet shell.
NOTE: Installing the energy-absorbing liner may require some practice.
3. Reattach the nape strap pad to the helmet shell via the screw, washer, and post removed
previously.
4. Squeezing the sides of the TPL (or SCL), reinstall it in the helmet with the rear edge aligned
with the top edge of the nape strap pad. Ensure that the nape hanger strap is taught and
the hook-and-pile fasteners are engaged.
5. Reattach the earcups to the earcup retaining pads.
6. Check the fit of the helmet per Paragraph 2-4, beginning on Page 27.
50
Figure 3-7. Removing Energy-Absorbing Liner