Gentex HGU-56/P, Инструкция по эксплуатации и обслуживанию

Страница: 45 / 86

SECTION 3: MAINTENANCE
This section provides instructions for maintaining the helmet to ensure that it remains in good
operating condition. Maintenance tasks are as follows:
• Preventive maintenance and cleaning (Paragraph 3-1, beginning on this page).
•
Troubleshooting (Paragraph 3-2, beginning on Page 43)
• Component replacement (Paragraph 3-3, beginning on Page 47)
3-1. PREVENTIVE MAINTENANCE AND CLEANING
To keep the helmet in satisfactory operating condition, the user should perform preventive
maintenance to discover all deficiencies and have them corrected as soon as possible before
additional damage or failure occurs. The preventive maintenance procedure consists of
pre-flight and post-flight inspections.
The user should also keep the helmet clean. The cleaning procedure consists of various
cleaning tasks.
3-1.1. Pre-flight Inspection
Prior to each flight, the user shall inspect the helmet to see that it is in serviceable condition,
reporting any damage to the maintenance technician. Refer to
Table 3-1 , which begins on the
next page.
3-1.2. Post-flight Inspection
After each flight, the user shall inform the maintenance technician of any component
malfunction or damage to the helmet. Refer to
Table 3-1 , which begins on the next page.
3-1.3. Cleaning
The user shall clean the helmet as needed. Refer to Table 3-2 on Page 42.
39