Chapter III. Usage and Maintenance
19
Changing Modes in the Scanner
Utility
There are two criteria for the Modes setting for
the scanner:
1. The Mode chosen in the Scanner Utility
should be the same as the Parallel Port Mode
defined in the BIOS (see above for BIOS
settings).
2. The most preferred mode is EPP.
If your BIOS does not support EPP, that is OK.
Your scanner can still function properly. Simply make
sure the Mode is set to the same setting as the BIOS
Parallel Port Mode setting.
Click on the down-arrow at the right of the Modes
box and choose the same Mode as that defined in your
BIOS from the list provided.
Click on the
Verify button to test the new Mode
setting.
It is still possible for the scanner to work if the
BIOS and Scanner Utility’s Parallel Port Mode
settings do not match. Thus, if the new Mode setting
does not work, try changing the Modes setting to a
different Mode and clicking on the Verify button
again.
See the
Troubleshooting
section in this help if
you have tried these adjustments and are still
encountering scanner connection problems.
Maintenance
To keep your scanner working smoothly, take a
moment to review the following maintenance tips.
•
Avoid using the scanner in a dusty environment.
When it is not in use, keep the scanner covered.
Attention
Содержание VividPro II
