Genius VividPro II, Руководство пользователя

Страница: 24 / 91

Chapter III. Usage and Maintenance
17
Note: You do not need to change this setting in the
BIOS Setup screen, especially if your printer is
functioning properly. You simply need to make sure
that the scanner is set to the same address by changing
Ports in the Scanner Utility program.
Changing Ports in the Scanner
Utility
The Parallel Port Address shown in Current Port
line and changeable in the Ports box should match the
Parallel Port Address in the BIOS settings (see above
for more details). To do this:
1. Note the Parallel Port Address in your BIOS
Settings (see above).
2. Click on the down-arrow at the right of the
Ports box.
3. Choose the same setting as the one defined in
your BIOS.
4. Click on the VERIFY button to test the new
setting.
Parallel Port Mode
If you are having trouble with your scanner
connection, you may need to change the Parallel Port
Mode. The Parallel Port Mode shown in CURRENT
MODE and changed in the MODES box is the type of
signal that is carried through the parallel port.
Personal computers are capable of sending a variety of
different signals through the parallel port to support a
variety of different add-on devices.
Changing BIOS Settings
The first thing to do is to try to change your BIOS
settings. To do this, you must restart your computer.
At the very beginning of the boot-up process, before
Windows starts to load, there will be a message that
says something like -Press <del> for Setup- or -Press
F1 for Settings-. You need to press the delete key or
Attention