Chapter III. Usage and Maintenance
13
Note: If the test failed in any way, please read
the
Scanner Utility
section of this manual and follow
the instructions therein.
Testing the Printer
If you have a printer connected to the scanner and
wish to test your printer in the new configuration:
1.
First, make sure your printer has been
properly installed in Windows.
2.
Close the image-editor by clicking on
the FILE menu option and then
clicking on EXIT.
3.
When prompted whether you wish to
save the current image click NO.
4.
Click on the Copy Utility icon in the
ScanManager window (far left).
5.
Make sure your printer is being
shown in the box towards the top of
the window.
6.
If not, click on the down-arrow to the
right of the box and choose your
printer from the list shown.
7.
Click on the large green Start button
towards the bottom of the Copy
Utility window.
8.
A copy of the scanned document or
image should soon appear at your
printer.
Note: It may take a long time to scan and print the
image and the resulting copy may not appear to
your liking. This can easily be solved by adjusting
the settings in the Copy Utility window. Please
refer to the
Copy Utility
section of this manual for
more information about adjusting the scanner and
printer settings.
Note: If the test failed in any way, please read
the
Scanner Utility
section of this manual and follow
the instructions therein.
Attention
Attention
Содержание VividPro II
