Genie S-100 Скачать руководство пользователя страница 68

Страница: 68 / 303

3 - 24

S-100 • S-105 • S-120 • S-125

Part No. 1268494

March 2017

Section 3 • Repair Procedures

9 Test all machine functions from the platform

controls.

Result: All platform control functions should not

operate.

10 Turn the key switch to ground control.

11 Test all machine functions from the ground

controls.

Result: All ground control functions should not

operate.

12 Using a suitable lifting device, lift the test weight

off the platform floor.

Result: The alarm should be off. The platform

overload indicator light should be off at the

platform controls and there should be no error

message on the LCD display at the ground

controls.

Note: There may be a 2 second delay before the

overload indicator lights and alarm turn off.

13 Test all machine functions from the ground

controls.

Result: All ground control functions should

operate normally.

14 Turn the key switch to platform control.

15 Test all machine functions from the platform

controls.

Result: All platform control functions should

operate normally.

PLATFORM COMPONENTS

7 Move the platform up and down by hand, so

it bounces approximately 2.5 to 5 cm / 1 to 2

inches. Allow the platform to settle.

Result: The alarm should be off. The platform

overload indicator light should be off at the

platform controls and there should be no error

message on the LCD display at the ground

controls. Proceed to step 8.

Result: The overload indicator lights are flashing

at the platform and ground controls, and the

alarm is sounding. Repeat this procedure

beginning with step 5.

Note: There may be a 2 second delay before

the platform overload indicator light and alarm

responds.

8 Add an additional test weight to the platform.

S-105 and S-125- 10 lb / 4.5 kg

S-100 and S-120- 12 lb / 5.4 kg.

Result: The alarm should be sounding.

The platform overload indicator light should be

flashing at the platform controls and “PLATFORM

OVERLOAD” should be displayed on the LCD

screen at the ground controls. Proceed to step 9.

Result: The alarm should be off. The platform

overload indicator light should be off at the

platform controls and there should be no error

message on the LCD display at the ground

controls. Remove the additional 10 lb / 4.5 kg

test weight. Repeat this procedure beginning

with step 6.

Note: There may be a 2 second delay before

the platform overload indicator light and alarm

responds.

Содержание S-100
















































































































































































































































































































Результаты поиска

Содержание S-100

Отзывы:

Бренды по названию

Популярные бренды

Genie S-100, Руководство по обслуживанию и ремонту

Результаты поиска

Содержание S-100

Отзывы:

Бренды по названию

Популярные бренды