Genie Nano-CL C2450, Руководство пользователя

Страница: 80 / 118

78
•
Operational Reference Genie Nano-CL Series™
8 Eight The data path in this mode uses eight Camera
Link Taps per timeslot.
10 Ten The data path in this mode uses ten Camera
Link Taps per timeslot.
Pixel Size clPixelSize Total size in bits of an image pixel.
Important: Use this feature to change the
camera’s output pixel format – if multiple
pixel formats are supported.
1.00
Beginner
8 Bits/Pixel Bpp8 Bpp8: 8 bits per pixel
10 Bits/Pixel Bpp10 Bpp10: 10 bits per pixel
Camera Link Pixel Clock
Frequency
clDeviceClockFrequency Returns the frequency, in Hz, of the Camera
clock.
1.00
Beginner
Camera Tap Geometry DeviceTapGeometry The tap geometry describes the geometrical
properties characterizing the different taps of
a multi-tap camera.
1.00
Beginner
Geometry 1X3 Y1 Geometry_1X3_Y1 3 tap area scan, with 1 zone in X with 3
alternating taps and 1 zone in Y. Tap 1 starts
with pixel coordinate (1,1), extending to the
image width -1 and height, using a step of 3
(that is x = 1, 4, 7,...). Tap 2 starts with pixel
coordinate (2, 1), extending to the image
width and height, using a step of 3 (that is, x
= 2, 5, 8, ...).
Firmware available on demand only.
Geometry 1X8 Y1 Geometry_1X8_Y1 8 tap area scan, with 1 zone in X with 8
alternating taps and 1 zone in Y. Tap 1 starts
with pixel coordinate (1,1), extending to the
image width -1 and height, using a step of 8
(that is x = 1, 9, 17,...). Tap 2 starts with
pixel coordinate (2, 1), extending to the
image width and height, using a step of 8
(that is, x = 2, 10, 18, ...)
Geometry 1X10 Y1 Geometry_1X10_Y1 10 tap area scan, with 1 zone in X with 10
alternating taps and 1 zone in Y. Tap 1 starts
with pixel coordinate (1,1), extending to the
image width -1 and height, using a step of 10
(that is x = 1, 11, 21,...). Tap 2 starts with
pixel coordinate (2, 1), extending to the
image width and height, using a step of 10
(that is, x = 2, 12, 22, ...).
Camera Link Data Valid Mode clDataValidMode The Data Valid mode describes if the Data
Valid signal from the camera is available to
the frame grabber.
1.00
Invisible
Off Off The Data Valid signal is not valid and should
not be used by the framegrabber for image
acquisition.
Active Active The Data Valid signal is valid and should be
used by the framegrabber for image
acquisition.
Payload Size PayloadSize Provides the number of bytes transferred for
each image or chunk on the stream channel.
1.00
Invisible