Genie GTH-3007 Stage B страница 72 Скачать руководство пользователя

Страница: 72 / 134

Page

C-36

OPERATING INSTRUCTIONS

Document 57.0008.5200 - 10/2006

Handler with telescopic boom

GTH-3007

C-6.3 LIFTING THE MACHINE

When the machine shall be lifted, use only means

having a suitable capacity. The characteristic data are

detailed in the relevant chapter of this manual and on

the identification plate.

For the machine lifting, anchor the chains to the special

lugs on the machine (marked with the decal below).

C-6.4 TRANSPORTING THE MACHINE ON

OTHER VEHICLES

To transport the machine on another vehicle, follow

the steps below:
•  Put chocks at the machine wheels.
•  Ensure ramps are correctly positioned.
•   Retract the boom to transfer position.
•   Carefully drive the machine onto the transporting

vehicle.

• Put the parking brake and rest the attachment flat

on the vehicle platform.

• Ensure the overall dimensions do not exceed the

allowed limits.

• Shut the engine down and close the driving cab of

the machine.

• Secure the machine to the vehicle platform by wheel-

chocks.

• Anchor the machine to the transporting vehicle with

suitable chains.

LED

Содержание GTH-3007 Stage B







































































































































Результаты поиска

Содержание GTH-3007 Stage B

Отзывы:

Похожие инструкции для GTH-3007 Stage B

Бренды по названию

Популярные бренды

Genie GTH-3007 Stage B, Руководство оператора

Результаты поиска

Содержание GTH-3007 Stage B

Отзывы:

Похожие инструкции для GTH-3007 Stage B

Бренды по названию

Популярные бренды