Genie GTH-3007 Stage B страница 68 Скачать руководство пользователя

Страница: 68 / 134

Page

C-32

OPERATING INSTRUCTIONS

Document 57.0008.5200 - 10/2006

Handler with telescopic boom

GTH-3007

C-5.4 CHANGING THE ATTACHMENT

DANGER

ELECTRICAL

DANGER

PROTECT THE

ENVIRONMENT

ATTENTION

CAUTION

IMPORTANT

DANGER

ELECTRICAL

DANGER

PROTECT THE

ENVIRONMENT

ATTENTION

CAUTION

IMPORTANT

Use only attachments directly manufactured or

recommended by Terexlift and detailed in the

“Optional attachments” section.

To change an attachment, operate as follows:
• Drive to the place where you will release the

mounted attachment (when possible, a solid and

sheltered site).

• Disconnect the quick connectors of the attachment

(if any), and connect the hydraulic locking pipes of

the attachments to couplings

• Rest the attachment flat on the ground.

• Pitch the attachment holding frame forward and

lower the boom to release the attachment upper

lock.

• move back with the machine (or with the boom) and

drive to the new attachment to be coupled.

• Hold the frame pitched forward and hook the upper

lock of the new attachment.

• Retract and raise the attachment some centimetres.

It will centre automatically on the quick coupling

frame.

• operate the control lever to lock the attachment.
• Couple the connectors of the attachment, if any, to

the quick couplings of the frame.

DANGER

ELECTRICAL

DANGER

PROTECT THE

ENVIRONMENT

ATTENTION

CAUTION

IMPORTANT

DANGER

ELECTRICAL

DANGER

PROTECT THE

ENVIRONMENT

ATTENTION

CAUTION

IMPORTANT

After substitution, visually check the attachment

is correctly coupled to the boom, before operating

the machine. A wrongly coupled attachment may

result in damage to persons or things.



Содержание GTH-3007 Stage B







































































































































Результаты поиска

Содержание GTH-3007 Stage B

Отзывы:

Похожие инструкции для GTH-3007 Stage B

Бренды по названию

Популярные бренды

Genie GTH-3007 Stage B, Руководство оператора

Результаты поиска

Содержание GTH-3007 Stage B

Отзывы:

Похожие инструкции для GTH-3007 Stage B

Бренды по названию

Популярные бренды