Genie GTH-3007 Stage B страница 34 Скачать руководство пользователя

Страница: 34 / 134

Page

B-6

SAFETY PRECAUTIONS

Document 57.0008.5200 - 10/2006

Handler with telescopic boom

GTH-3007

• When entering/leaving the cab or other raised parts,

always face the machine; never turn the back.

• Except for maintenance purposes, do not remove

safety devices, shields, protection cases, etc.

Should their removal be necessary, stop the engine,

remove them with the greatest care and always

remember to refit them before starting the engine

and using the machine again.

• before any maintenance or repair work, stop the

engine and disconnect the batteries.

• Do not lubricate, clean or adjust moving parts.

• Do not carry out operations manually when specific

tools are provided for this purpose.

• Avoid the use of tools in bad condition or use in

an improper way i.e. pliers instead of adjustable

wrenches, etc.

• Applying loads in different points of the attachment

holding plate is forbidden.

• before carrying out operations on hydraulic

lines under pressure or disconnecting hydraulic

components, ensure the relevant line has been

previously depressurised and does not contain any

hot fluid.

DANGER

ELECTRICAL

DANGER

PROTECT THE

ENVIRONMENT

ATTENTION

CAUTION

IMPORTANT

DANGER

ELECTRICAL

DANGER

PROTECT THE

ENVIRONMENT

ATTENTION

CAUTION

IMPORTANT

Any intervention on the hydraulic circuit must be

carried out by authorised personnel.

The hydraulic circuit of this machine is fitted with

pressure accumulators. You and others could be

seriously injured if accumulators are not completely

depressurised.

For this purpose, shut the engine down and step

on the brake pedal 8÷10 times.

• When carrying out operations at hazardous heights

(over 1.5 meters from the ground), always use

approved fall restraint or fall arrest devices.

• Do not enter/leave the machine while it is running.
• Do not leave the driving place when the machine is

running.

• Neither stop nor carry out interventions under

or between the machine wheels when engine is

running. When maintenance in this area is required,

stop the engine.

• Do not carry out maintenance or repair works without

a sufficient lighting.

• When using the machine lights, the beam should

be oriented in order not to blind the personnel at

work.

• before applying voltage to electric cables or

components, check their connection and proper

functioning.

• Do not carry out interventions on electric components

with voltage over 48V.

• Do not connect wet plugs or sockets.
• Plates and hazard warning stickers shall never be

removed, hidden or become unreadable.

Содержание GTH-3007 Stage B







































































































































Результаты поиска

Содержание GTH-3007 Stage B

Отзывы:

Похожие инструкции для GTH-3007 Stage B

Бренды по названию

Популярные бренды

Genie GTH-3007 Stage B, Руководство оператора

Результаты поиска

Содержание GTH-3007 Stage B

Отзывы:

Похожие инструкции для GTH-3007 Stage B

Бренды по названию

Популярные бренды