Page
D-11
MAINTENANCE
Document 57.0008.5200 - 10/2006
Handler with telescopic boom
GTH-3007
D-3.6 ENGINE AIR FILTER
Clean the engine air filter every 10 hours; replace the
filtering element, if necessary.
1
Cleaning and changing the external element:
- Stop the engine and engage the parking brake.
- Unscrew wingnut
A
and remove cover
B
.
- Unscrew wingnut
C
and remove the outer element
D
.
- Clean the filter bowl.
- Dry clean the cartridge (max. pressure: 6 bar)
and direct the air jet from inside to outside.
- Check for cracks in the filtering element by
introducing a lamp inside.
- Smear the seal with grease, then refit the
element.
- Tighten wingnut
C
, close cover
B
and tighten with
wingnut
A
.
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
As soon as the warning lamp 24 on the cab dashboard
switches on, replace the outer element.
2
Changing the internal element:
- See step
1
for removing the outer element.
- Loosen wing nut
E
and remove the inner element
F
.
- Clean the filter bowl.
- Smear the seal with grease, then mount the
new element and make sure it is correctly
positioned.
- Refit the outer element and the cover (see step
1
).
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
The inner element should be replaced every two
times the outer element is replaced.
Daily remove any dust collected in the filter by
pressing the rubber cap G.
SERVICE INTERVAL
Running-in _____________________________
None
Cleaning _____________________
Every
10
hours
outer element change __________
Every
500
hours
Inner element change ________
Every
1000
hours
