Document 57.0008.5200 - 10/2006
Page
1
Handler with telescopic boom
GTH-3007
Section
G
contains tables and various enclosed
documents like load charts, wiring diagrams, hydraulic
schemes, torque wrench setting table, etc.
Sections are subdivided into chapters and paragraphs
that are numbered progressively.
The quickest way to look for information is the reference
to the general index or the titles of the single chapters
and paragraphs that represent keys for an easy
consultation.
Take care of this manual and keep it in an
accessible place within the machine, even
after its reading, so that it will always be within
reach if in doubt.
If you are unsure about anything, please address to
GENIE Assistance Service or to your agent/dealer:
addresses, phone and fax numbers are printed in
the cover and in the title-page of this manual.
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
DANGER
DANGER
ELECTRICAL
DANGER
PROTECT THE
ENVIRONMENT
ATTENTION
CAUTION
IMPORTANT
Any difference between the contents of this manual
and the real functional character of the machine
can be attributed to either a machine manufactured
before the issue of this manual or to a manual going
to be updated after some changed effected on the
machine.
Always contact GENIE Assistance Service for any
updated version of this manual and any additional
information.
INTRODUCTION
INTRODUCTION
This manual provides information for a safe and proper
operation and maintenance of the machine.
STRICTLY COMPLY WITH THE
INSTRUCTIONS GIVEN IN THIS HANDBOOK!
READ AND UNDERSTAND THIS HANDBOOK
BEFORE STARTING, USING AND
CARRYING OUT ANY OPERATION WITH
AND ON THE MACHINE.
The handbook is divided into seven sections:
Sect.
A GENERAL INFORMATION
Sect.
B SAFETY PRECAUTIONS
Sect.
C OPERATING INSTRUCTIONS
Sect.
D MAINTENANCE
Sect.
E TROUBLESHOOTING
Sect.
F OPTIONAL ATTACHMENTS
Sect.
G TABLES AND ENCLOSURES
Section
A
contains general concepts that are decisive
for the knowledge of the main parts of the machine.
It also contains all necessary data for a correct
identification of the machine, the technical features of
the machine, etc.
Section
B
is especially addressed to the personnel, who
shall operate, repair and service the machine, and, in
case of companies with a wide fleet of machines, to
those responsible for safety.
It describes the essential compulsory qualities of the
personnel in charge and other important information
for the safety of persons and things.
Section
C
is mainly addressed to the operators who
operate the machine. This section illustrates all control
devices.
Additionally, it contains the main use instructions -i.e.
engine starting, machine parking, machine storing.
Section
D
is addressed to those responsible for
maintenance and the servicemen.
The section describes the maintenance schedule and
the relevant intervals.
Section E deals with the failure diagnostics.
Section
F
makes a list of the main interchangeable
attachments that can be coupled to the machine:
dimensions, weight, application field and limits of use.
