Geniewatch, NSD5451 User Manual (Ver. 1.0)
Genie Network
39
4.9
Pattern Setup
PATTERN SETUP
------------------------
PATTERN NO. 1
UNDEFINED
CLR PATTERN CANCEL
RUN PATTERN
<EDIT PATTERN>
BACK
EXIT
z
Pattern Number [1~4 ]
Selects Pattern number to edit.
If a selected pattern number is not
defined, "UNDEFINED" will be
displayed under selected pattern
number.
z
Clear Pattern
[CANCEL/OK]
Deletes data in current pattern
z
Run Pattern
Runs Pattern for the test purposes to
check if it works properly.
z
Edit Pattern
Starts editing pattern.
Edit Pattern
EDIT PATTERN 1
------------------------
MOVE TO START POSITION
[NEAR:START /FAR:CANCEL]
EDIT PATTERN 1
[NEAR:SAVE /FAR:DELETE]
0/0/x1/N
①
By using Joystick, move to start position with
appropriate zoom. To start pattern recording, press
NEAR key. To exit this menu, press FAR key.
②
Move camera with joystick of controller or run preset
function to memorize the path (mostly curve path) in a
selected pattern. The total memory size and the rest
memory size is displayed in the form of bar. Maximum
1200 communication commands can be stored in a
pattern.
③
To save data and exit, press NEAR key. To cancel
recording and delete record data, press FAR key.
