Geniewatch, NSD5451 User Manual (Ver. 1.0)
Genie Network
16
2.3
Installation using Ceiling Mount Bracket
①
To pass cables through to upside of ceiling,
make a hole whose diameter is about
50~60mm on the ceiling panel. Then attach
the Ceiling Mount Bracket on.
②
Turn camera housing on its axis in
CW(Clockwise) direction until it stops.
③
Hook up “Drop Prevention Spring” on
main body to prevent camera from
unexpected drop and connect cables to
Main Body with terminal blocks.
④
Check the 2 mold line for assembly
before starting assembly. Line up the mold
lines as shown in the circle shown below
and assemble Main Body to Ceiling Mount
Bracket. Then screw up the 4 screws with
wrench included in the product box and
detach the vinyl on dome cover.
### Important Notice ###
•
Before starting installation, make sure that Camera ID and Protocol are set up properly.
•
To adjust the location of camera, pipe and coupler should be needed. Note that they should
not be included in the product box and not supplied by manufacturer
Wrench
