Geniewatch, NSD5451 User Manual (Ver. 1.0)
Genie Network
38
4.8
Swing Setup
SWING SETUP
------------------------
SWING NO. 1
1ST POS. NOT USED
2ND POS. NOT USED
SWING SPEED 30/SEC
CLEAR SWING CANCEL
RUN SWING
BACK
EXIT
z
Swing Number [1~8]
Selects Swing number to edit. If a
selected Swing has not defined, "NOT
USED" is displayed in 1st Position and
2nd Position
z
1st Position
2nd Position
[PRESET 1~128]
Set up the 2 position for Swing function.
If a selected preset is not defined,
"UNDEFINED" will be displayed as
shown below.
When swing function runs, camera
moves from the preset assigned as the
1st point to the preset assigned as the
2nd point in CW(Clockwise) direction.
Then camera moves from the preset
assigned as the 2nd point to the preset
assigned as the 1st point in
CCW(Counterclockwise) direction. In
case that the preset assigned as the 1st
point is same as the preset assigned as
the 2nd point, camera turns on its axis
by 360
°
in CW direction and then it
turns on its axis by 360
°
in CCW
direction.
SWING SETUP
------------------------
SWING NO. 1
1ST POS. PRESET5
2ND POS. NOT USED
UNDEFINED
z
Swing Speed
[1
°
/sec ~180
°
/sec]
Sets Swing speed from 1
°
/sec to
180
°
/sec.
z
Clear Swing
[CANCEL/OK]
Deletes current Swing data.
z
Run Swing
Runs Swing for the test purposes to
check if it works properly.
