Geniewatch, NSD5451 User Manual (Ver. 1.0)
Genie Network
34
Parking Action Setup
PARKING ACTION SETUP
------------------------
PARK ENABLE OFF
WAIT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
If Park Enable is set to ON, camera runs assigned function
automatically if there is no PTZ command during assigned
"Wait Time".
z
Park Enable [ON/OFF]
z
Wait Time
[1~59 sec/1~180 minute]
A camera automatically run a "Part Action" if
there is no command from controller for this
time period.
z
Park Action
[HOME/PRESET/PATTERN/SWING/GROUP/P
REV ACTION]
Sets what a camera should do when there is
no command from a controller for the pre-
defined time period (“WAIT TIME”). If Park
Action is set to “HOME”, the camera moves
to the home position which is memorized
when the system boots. If Park Action is set
to “PREV. ACTION”, the camera runs the
previous action which it ran most recently.
