Geniewatch, NSD5451 User Manual (Ver. 1.0)
Genie Network
17
2.4
Installation using Wall Mount Bracket
①
To pass cables through to inside of wall,
make a hole whose diameter is about
50~60mm on the wall. Then attach the
Wall Mount Bracket with gasket on it.
②
Hook up “Drop Prevention Spring” on
main body to prevent camera from
unexpected drop and connect cables to
Main Body with terminal blocks.
③
Check the 2 mold line for assembly
before starting assembly. Line up the mold
lines as shown in the circle shown below
and assemble Main Body to Wall Mount
Bracket.
④
Then screw up the 4 screws with wrench
included in the product box and detach
the vinyl on dome cover.
### Important Notice ###
•
Before starting installation, make sure that Camera ID and Protocol are set up properly.
•
When the pipe hole on side of Mount Bracket is not used, make sure that the hole is closed
properly
Wrench
