Genie Geniewatch NSD5451, Руководство пользователя

Страница: 10 / 45

Geniewatch, NSD5451 User Manual (Ver. 1.0)
Genie Network
9
„ Lockup Screw
Fixes main unit to surface mount bracket.
„ Cabling Terminal Block
During installation, Power, Video, Communication, Alarm Input cables are connected on to this cabling
terminal block.
„ DIP Switch
Adjusts camera ID and protocols.
„ Drop Prevention Spring
Keeps the camera from dropping during installation and repair. After installing a bracket, hang the
spring to the drop prevention hook of Main Body as shown in the following picture for further tasks.
„
Assemble Reference Line
Mark to assemble Main Body to bracket.
„ Ethernet Connector
RJ-45 connector for network connection
„ Audio Connector
Connect Audio Input / Output. Audio signal is in line level, therefore, microphone or speaker with
amplification function should be used.
„
Power LED
This red light becomes illuminated when 12V DC power is supplied to the unit.
„ IP Reset Switch
Reset its network configuration to the factory defaults. You will lose all data that had been entered
previously. To initialize the system to the factory default, press the reset button for more than 5
seconds.