General DataComm 060A027-001 Скачать руководство пользователя | Manualshive

Страница: 13 / 138

background image

Preface

Support Services and Training

060R122-000

SpectraComm Dual V.34 Modem

xi

Issue 15

Installation and Operation

Support Services and Training

General DataComm offers two comprehensive customer support organizations dedicated to pre-and
post-sale support services and training for GDC products. Corporate Client Services and Factory-
Direct Support & Repair assist customers throughout the world in the installation, management,
maintenance and repair of GDC equipment. Located at GDC’s corporate facility in Naugatuck,
Connecticut USA, these customer support organizations work to ensure that customers get
maximum return on their investment through cost-effective and timely product support.

Corporate Client Services

Corporate Client Services is a technical support and services group that is available to GDC
customers throughout the world for network service and support of their GDC products. Customers
get the reliable support and training required for installation, management and maintenance of GDC
equipment in their global data communication networks. Training courses are available at GDC
corporate headquarters in Naugatuck, Connecticut, as well as at customer sites.

Factory Direct Support & Repair

GDC provides regular and warranty repair services through Factory Direct Support & Repair at its
U.S. headquarters in Naugatuck, Connecticut. This customer support organization repairs and
refurbishes GDC products, backed by the same engineering, documentation and support staff used
to build and test the original product. Every product received for repair at Factory Direct Support
& Repair is processed using the test fixtures and procedures specifically designed to confirm the
functionality of all features and configurations available in the product.

As part of GDC’s Factory Direct program, all product repairs incorporate the most recent changes
and enhancements from GDC Engineering departments, assuring optimal performance when the
customer puts the product back into service. Only GDC’s Factory Direct Support & Repair can
provide this added value.

Contact Information

General DataComm, Inc.
6 Rubber Avenue
Naugatuck, Connecticut 06770 USA
Attention: Corporate Client Services

Telephones:  1 800 523-1737
               1 203 729-0271
Fax: 1 203 729-3013  or 1 203 729-3014
Email: [email protected]

General DataComm, Inc.
6 Rubber Avenue
Naugatuck, Connecticut 06770 USA
Attention: Factory Direct Support & Repair

Telephones: 1 800 523-1737
1 203 729-0271
Fax: 1 203 723-2883
Email: [email protected]

Hours of Operation:

Monday - Friday 8:30 a.m. - 5:00 p.m. EST

(excluding holidays)

http://www.gdc.com

«
...
11
12
13
14
15
...
»

Содержание 060A027-001











































































































































Отзывы:

Нет отзывов

Похожие инструкции для 060A027-001

Digital Business System

Бренд: Panasonic Страницы: 58

Бренд: Abocom Страницы: 19

Бренд: Sagem Страницы: 158

Бренд: SBC Страницы: 32

Бренд: Sel Страницы: 16

Бренд: Sagem Страницы: 76

Бренд: NETGEAR Страницы: 28

Бренд: Technicolor Страницы: 3

Бренд: Packet One Страницы: 50

Бренд: Teledyne Страницы: 2

Бренд: Viola Systems Страницы: 21

Бренд: Garnet Страницы: 17

Бренд: Garnet Страницы: 19

Бренд: Zte Страницы: 9

Бренд: Four-Faith Страницы: 49

Бренд: Trust Страницы: 44

Бренд: FALCOM Страницы: 26

Бренд: TC Communications Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды