General DataComm 060A027-001, Руководство по установке и эксплуатации

Страница: 73 / 138

Operation Terminal Interface Overview
060R122-000 SpectraComm Dual V.34 Modem 3-39
Issue 15 Installation and Operation
Selecting a Unit (Shelf Inventory Screen)
From this point, procedures are the same for both types of connection. The Shelf Inventory screen
below is for a typical two-shelf installation. The two columns for Slots 17 through 32 do not appear
when there is only one shelf. Note that the Shelf Inventory will display the word "
alarm
" in
parentheses next to the name of any unit that currently has an active alarm condition.
Figure 3-2 SCM Terminal Interface Shelf Inventory
3. At the Shelf Inventory screen, type the slot number of the unit you intend to work with, then
press
Enter
. If the selected unit is a Dual V.34 modem, the unit displays the Line Selection
screen, shown below. i
4. In the Line Selection screen, Line 1 designates the Dual V.34 unit’s “Modem A” and Line 2
designates “Modem B”. Type the selection you want to work with and press
Enter
. The
Main Menu for the selected modem appears, as shown in Figure 3-3 .
Slot Card Slot Card
------------------------------------------------------
[1] MANAGER [17] DUAL V.34
[2] SC5001 [18] DUAL V.34
[3] SC5034 [19] DUAL V.34
[4] SC5034 [20] DUAL V.34
[5] SC5034 [21] DUAL V.34
[6] SC5034 [22] DUAL V.34
[7] SC5034 [23] DUAL V.34
[8] SC5034 [24] DUAL V.34
[9] SC5034 [25] VF288
[10] SC5034 [26] VF288
[11] SC5034 [27] VF288
[12] SC5034 [28] VF288
[13] SC5034 [29] VF288
[14] SC5034 [30] VF288
[15] [31] VF288
[16] [32]
[0] Close Session [C] Circuit Identification
Enter selection:
SLOT: 17 DUAL V.34
[1] Line 1
[2] Line 2
[0] Go To -> Shelf Inventory
Enter Selection : [ ]