12
Owner’s Manual for MGG450
General Information
Lifting the Unit
WARNING
Personal injury. Failure to properly connect
lifting cables, chains, or straps could result in
death, serious injury, or property damage.
(000346)
WARNING
Personal Injury. Verify all fasteners are properly
tightened prior to lifting unit. Failure to do so could
result in death, serious injury, or property damage.
(000351)
The unit is capable of being lifted by
or
Units are often lifted during times of repair, and therefore
the lifting operator must be aware of any changes that
may affect the center of gravity (CG), including, but not
limited to, removal and addition of system components
such as engine or generator. Installation drawings show
the lifting points and the CG location for rigging and lifting
purposes. Always attach lifting and rigging devices at the
designated points on the generator set. Do not use the
lifting points of the engine or alternator to lift the unit. See
A
C
B
001430
Figure 2-9. Lifting Points
A
Lifting eye (4)
B
Forklift pockets (4)
C
Center hoist ring
Single Point Lift
WARNING
Personal Injury. Do not use lifting hook if there are
signs of damage or corrosion. Doing so could result
in death, serious injury, or property damage.
(000349)
WARNING
Personal Injury. Do not use lifting hook other than as
directed. Failure to do so could result in death, serious
injury, or property damage.
(000350)
The unit has three hoist rings located on top of the unit.
The center hoist ring is the main attachment point and
the forward and aft are for redundancy. Only lift the unit
with a crane rated to lift the entire unit. Visually inspect
the hoist ring before each use. Apply load slowly. Do not
use oversized hooks that might spread the hoist ring. Do
not attach guidelines to the hoist ring.
Four Point Lift
Use only personnel experienced with rigging, lifting and
moving heavy machinery.
The four point lift is designed for use with an adequately
sized spreader bar (not included with equipment). Prior to
attaching lifting equipment, verify all doors and access
panels are closed and secured.
Never attempt to lift the unit without the use of a spreader
bar, as damage to the unit will result.
Fork Pockets
IMPORTANT NOTE: Only lift the unit with a fork truck
that is properly rated to lift this equipment. Use
caution when terrain is uneven, and never exceed the
capabilities of the fork truck. Refer to
for weight and dimensions.
Lift only from the side. Avoid approaching the unit at an
angle, as this can permanently damage the forklift
pockets, tires, or cabinet. Verify any obstructions are
clear of the forklift tines before lifting.
Содержание MGG450
