Genelec Loudspeaker Manager (GLM) 2.0 - System Operating Manual
page 30 of 55
•
group name
•
audio signal type, analog or AES/EBU digital
•
monitors and subwoofers in the group (playing when this group is selected) and the ones
that are not used in this group
•
the acoustic calibrations that are applied when this group is playing for all monitors and
subwoofers
•
monitoring level setting for the group (this can be used e.g. as a monitoring level preset for
the group)
•
system delay (this can delay the whole reproduction system, for example to synchronize
the whole group/audio system with a video presentation)
Access to group settings
To access or edit the settings common to a group, use the menu command ‘Group | Edit Group’.
This displays an editing window where the group settings and the settings for individual monitors
and subwoofers can be edited. The group settings are shown when you enter the editor. You will
see the monitor and subwoofer settings once you single-click on any of the monitors and
subwoofers in your layout.
Caution: if you double click, GLM interprets this as a quick command to remove that monitor from
the Group.
Figure 22. Common settings for a SAM group are presented on the left side of the SAM group
definition display.
