Genelec Loudspeaker Manager (GLM) 2.0 - System Operating Manual
page 19 of 55
Creating a SAM Monitor Group
A SAM monitoring group is a set of monitors and subwoofers that reproduce audio together. A
group contains settings that can optimize every monitors and subwoofers.
To define a monitoring group:
•
give the group a name (1) that describes it (e.g. Analog Stereo)
•
select the input signal (2) for the group (Analog or AES/EBU)
•
click on each monitor and subwoofer, then edit/check the setting (3) (for more information,
see the GLM Advanced Settings); the monitor with a green halo is active; monitors with
yellow halo are not part of the group
•
confirm the group settings by clicking on the ‘Confirm Group’ button (4)
For more detailed information on using and setting up Groups, see the section ‘GLM Advanced
Use’.
Figure 15. Group definition window; the monitors with a green halo is active; monitors with a yellow
halo are not part of the active group
