Genelec Loudspeaker Manager (GLM) 2.0 - System Operating Manual
page 17 of 55
Figure 11. Drag and drop the monitor icons onto the layout grid to build a system layout
Use your mouse to drag and drop monitors or subwoofers onto the layout. Drag a monitor or
subwoofer icon from the stack to the layout grid on the right and drop it to the position that matches
its position in the room. Continue this until the stack is empty.
Note: monitors and subwoofers are automatically named by the location information, e.g. when the
monitor is dropped on the left side, it is named as ‘Left 8330A’. If a monitor has AES/EBU digital
input it will also get a default AES/EBU subframe to be reproduced in the digital group, e.g. when
the monitor is dropped to the left side, it gets subframe A selected as default.
Figure 12. An example of an empty monitor stack
When you drag, the real monitor plays an identification tone and flashes the front panel LED. The
identification tones depend on the SAM product type and the tones can vary between products in
the same setup.
After all monitors and subwoofer have been moved to the layout, click on the ‘Confirm Layout’ to
save the setup, and give it a name. This saves the setup on the computer hard drive.
