Geist Watchdog Wi, Инструкция по эксплуатации

Страница: 93 / 105

Chapter 4 - Final Checkout 93
© 2017
GM1212 Geist Watchdog Wi Instruction Manual
For example, if you were determining communications objects for sensor number 28:
Modbus Registers are as follows, where the n is replaced with the sensor’s two digit (put a
0 before a single digit number) sensor number and y is replaced with the sensor’s two digit
(put a 0 before a single digit number) sensor number minus one, so if you were working
with sensor 28 you’d replace n with 28 and y with 27.
40y1 = 40271
40y2 = 40272
40y3 = 40273
40y4 = 40274
40y6 = 40276
40y7 = 40277
40y8 = 40278
40n0 = 40280
BACnet Instances are as follows, where the n is replaced with the sensor’s sensor number
ai: n01 = ai: 2801
ai: n02 = ai: 2802
ai: n03 = ai: 2803
av: n01 = av: 2801
av: n02 = av: 2802
SNMP Object Identifiers are as follows, where the last digit, n, is replaced with the
sensor’s sensor number
1.3.6.1.4.1.3184.1.15.2.2.1.2.n = 1.3.6.1.4.1.3184.1.15.2.2.1.2.28
1.3.6.1.4.1.3184.1.15.2.2.1.3.n = 1.3.6.1.4.1.3184.1.15.2.2.1.3.28
1.3.6.1.4.1.3184.1.15.2.2.1.4.n = 1.3.6.1.4.1.3184.1.15.2.2.1.4.28
1.3.6.1.4.1.3184.1.15.2.2.1.6.n = 1.3.6.1.4.1.3184.1.15.2.2.1.6.28
1.3.6.1.4.1.3184.1.15.2.2.1.7.n = 1.3.6.1.4.1.3184.1.15.2.2.1.7.28
1.3.6.1.4.1.3184.1.15.2.2.1.8.n = 1.3.6.1.4.1.3184.1.15.2.2.1.8.28
1.3.6.1.4.1.3184.1.15.2.2.1.9.n = 1.3.6.1.4.1.3184.1.15.2.2.1.9.28
1.3.6.1.4.1.3184.1.15.2.2.1.10.n = 1.3.6.1.4.1.3184.1.15.2.2.1.10.28