Geist Watchdog Wi, Инструкция по эксплуатации

Страница: 29 / 105

Chapter 3 - Installation 29
© 2017
GM1212 Geist Watchdog Wi Instruction Manual
Antenna
The Watchdog Wi is shipped with three 900 MHz antennas. Plug each antenna into its
appropriate jack on the back of the Watchdog Wi and tighten the connections firmly.
Figure 3-6 Antenna Connections
Once the antennas are secure, you’ll need to ensure proper antenna position. Antennas A
and B can be close together, but to avoid signal interference they both need to be as far
away from antenna C as possible. Extend the leader cables on the antennas to their fullest
lengths and secure the antennas as far away from the Watchdog Wi, and as high off the
ground as possible.
Windows
· Windows 2000 / XP / Server 2003:
Click the Start button, choose Settings , then Network Connections.
· Windows 7 / Server 2008:
Click the Start button, then choose Control Panel >> Adjust Your Computer's Settings
>> View Network Status and Tasks >> Change Adapter Settings .
(Alternatively, on some Windows 7 machines, this may be Start , then Settings >> Control
Panel >> Network and Sharing Center >> Change Adapter Settings .)
· Windows 8 / Server 2012:
Move the mouse cursor to the bottom or top right corner of the screen, click the Settings
icon, then select Control Panel . Change the view type from Category to Large or Small
Icons if necessary, then select Network and Sharing Center , then Change Adapter
Settings .
· Windows 10:
Click the Start button, then choose Network & Internet , then click Change adapter
options.