Geist Watchdog Wi, Инструкция по эксплуатации

Страница: 66 / 105

Geist Watchdog Wi Instruction Manual 66
© 2017
GM1212 Geist Watchdog Wi Instruction Manual
A battery meter can be displayed for each individual sensor. Use this drop-down menu to
determine if the battery reading will be displayed, and if it will be displayed as voltage or
run hours. Default: Voltage
Low Battery Alarm
If you’re monitoring the battery voltage reading, you need to assign a voltage threshold
for the low battery alarm. Assign that here. Default: 2.7 Volts
Sensor CSV File
Upload Sensor CSV
Upload a CSV file to configure sensors in mass on this unit. This feature is particularly
helpful if you are configuring multiple identical Watchdog Wi systems simultaneously.
Download Sensor CSV File
Download a CSV file that shows all sensors configured in the Watchdog Wi.
Delete Sensors
Delete Sensor Range
If you wish to delete some sensors monitored by the Watchdog Wi without deleting all the
sensors, use this option. Enter the range of sensors you wish to delete, and click the
Delete button. If you wish to delete one specific sensor, enter that sensor’s number as
both the start and end points for the sensor range.
Delete All Sensors
This command erases all the information about the sensors the Watchdog Wi is currently
monitoring. Users will have to reinstall sensor information after the button is clicked, or
rediscover sensors already deployed.
Delete All Sensor Data Logs
Click this button to delete all logged data for all the sensors associated with this system.
Radios
Alternate communications channel pairs and radio communications can be edited on this
page.
If you need to change the channel pair settings for your Watchdog Wi system, refer to
Watchdog Wi Channel Pairs
. While it’s not a difficult process, there are quite a few steps
involved because you do need to make sure all the components of your system - the
manager, sensors, and range extenders - are all operating on the correct channel pairs.