manualshive.com logo in svg

Gehl CTL60, Руководство оператора, Страница: 24 / 170

Поделиться
Скачать
Gehl CTL60 Скачать руководство пользователя страница 24

22

SAFETY

Operating Precautions

T7A0261

Cautions on Towing

When towing, selecting the wrong wire rope,
inspecting improperly, or towing in the wrong
way could lead to accidents resulting in
serious injury or death.

¡

The wire rope breaking or coming
detached could be extremely dangerous.
Use a wire rope suited for the required
towing force.

¡

Do not use a wire rope that is kinked,
twisted or otherwise damaged.

¡

Do not apply strong loads abruptly to the
wire rope.

¡

Use safety gloves when handling the wire
rope.

¡

Make sure there is an operator on the
machine being towed as well as on the
machine that is towing.

¡

Never tow on slopes.

¡

Do not let anyone near the wire rope while
towing.

Loaders are NOT designed for
lifting loads

The machine is NOT specifically designed
for lifting loads work and has no safety
devices for crane operation.

Danger of flying objects

¡

This machine is not equipped with
protective guards to protect the operator
from flying objects. Do not use the
machine in places where there are risks
of the operator being hit by flying objects.

2

1

T9A007

1

1

Содержание CTL60











































































































































































Отзывы:

Нет отзывов