Gefen EXT-UHD600A-88, Руководство пользователя

Страница: 38 / 232

page | 26
Turning off an input simulates a source that is not present.
Setting an input to the OFF state can only be performed through the IR remote control or
the built-in web interface. See Routing Inputs to Outputs (page 18) for more information.
1. Starting from any screen, press the button of the output ( Local , A - H ), on the
top-portion of the IR remote control, where the Input is routed.
For example, if we want to “block” Input 3 , and Input 3 is routed to Output H ,
then we would press the H button.
5. To “unblock” an input, press the desired Output button (A - H) then select an input
from the Input buttons, located at the bottom-portion of the IR remote control.
OK
Output
RMT-88A
Menu
Back
Down
Up
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D Mute
E F Volume
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
B
asic Oper
ation
B
asic Oper
ation
Output buttons
Off button
out H :output H
A/V In:off
2. Press the Off button on the IR remote control.
3. The selected input will be turned “off” immediately.
4. The front-panel display will show the change:
In order for an input, on the matrix, to be turned
“off”, a source device must be connected to the
input.
Turning Off Inputs
Input buttons
B
asic Oper
ation
B
asic Oper
ation