Gefen EXT-UHD600A-88, Руководство пользователя

Страница: 49 / 232

page | 37
HDCP Control
This menu option restricts the version of HDCP that is accepted by an input. This matrix
supports up to HDCP 2.2.
1. Go to the routing screen . If the routing screen is not displayed, then press
the Back button on the front panel or on the IR remote control until the routing screen
is displayed.
2. Press and release the Menu button on the front panel or on the IR remote control.
The Menu button, on the front panel, will momentarily flash blue when it is pressed.
6. Press the Enter button on the front panel or on the IR remote control to display the
input control screen.
OK
Output
RMT-88A
Menu
Back
Down
Up
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D Mute
E F Volume
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
B
asic Oper
ation
B
asic Oper
ation
Menu System
2. The Setup menu will be displayed:
3. Press the Enter button on the front panel.
If using the included IR remote control, press the
OK button.
4. The HPD Control option will be displayed:
5. Press and release the ▲ or ▼ buttons on the front
panel or on the IR remote control, to select the
HDCP Control option:
setup
setup:
HDP control
setup:
hdcp control
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C
Out D
Out E
Out F
Out G
Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
SETUP