Gefen EXT-UHD600A-88, Руководство пользователя

Страница: 70 / 232

page | 58
RS-232 Feedback
Use this menu option to enable / disable RS-232 feedback. When disabled , RS-232
commands will be executed but will not provide a response.
1. Go to the routing screen . If the routing screen is not displayed, then press the
Back button on the front panel or on the IR remote control until the routing screen
is displayed.
2. Press and release the Menu button on the front panel or on the IR remote control.
The Menu button, on the front panel, will momentarily flash blue when it is pressed.
OK
Output
RMT-88A
Menu
Back
Down
Up
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D Mute
E F Volume
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
B
asic Oper
ation
B
asic Oper
ation
Menu System
3. The Setup menu will be displayed:
4. Press and release the ▲ or ▼ buttons on the
front panel or on the IR remote control,
to select the System menu:
5. Press the Enter button on the front panel.
If using the included IR remote control, press the
OK button.
6. Press the ▲ or ▼ buttons on the front panel or
on the IR remote control to select the RS-232
Feedback menu.
The current setting will be displayed.
setup
System
RS-232 feedback:
enabled
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C
Out D
Out E
Out F
Out G
Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
SETUP
B
asic Oper
ation
B
asic Oper
ation