Gefen EXT-UHD600A-88, Руководство пользователя

Страница: 37 / 232

page | 25
When masking outputs through the front panel, the IR remote control must be used.
Outputs can also be masked by by using the built-in web interface. See Routing Inputs and
Masking Outputs (page 75) for more information.
When an output is masked, the signal is blocked at the output. Let’s say Input 02
is routed to Output A , Output B , and Output C . If we mask Output B , then only A/V
signal on Output B will be blocked. Output A and Output C will remain unaffected.
1. Start from any screen. In this example, we are starting at the routing screen .
OK
Output
RMT-88A
Menu
Back
Down
Up
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D Mute
E F Volume
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
B
asic Oper
ation
B
asic Oper
ation
2. Press the Mask button on the IR remote control.
3. Select the desired output by pressing one of the
Output buttons (A - H) on the top-portion of the IR
remote control.
4. The selected output will be masked immediately.
5. To unmask the the desired output, repeat steps 2
and 3.
Output buttons
Mask button
out B :output B
A/V In:input 02
Information
When an output is masked, no feedback will be shown on the front-panel
display. However, the built-in web interface will always reflect a masking
change.
Masking Outputs