Gefen EXT-UHD600A-88, Руководство пользователя

Страница: 52 / 232

page | 40
OK
Output
RMT-88A
Menu
Back
Down
Up
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D Mute
E F Volume
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
B
asic Oper
ation
B
asic Oper
ation
Menu System
Setting the EDID Mode
This menu option allows the EDID that will be used by the source that is connected to each
input. Internal, external, or a custom EDID can be selected.
1. Go to the routing screen . If the routing screen is not displayed, then press
the Back button on the front panel or on the IR remote control until the routing screen
is displayed.
2. Press and release the Menu button on the front panel or on the IR remote control.
The Menu button, on the front panel, will momentarily flash blue when it is pressed.
2. The Setup menu will be displayed:
3. Press and release the ▲ or ▼ buttons on the front
panel or on the IR remote control,
to select the EDID Management menu:
4. Press the Enter button on the front panel.
If using the included IR remote control, press the
OK button.
5. The EDID Mode menu will be displayed:
setup
EDID management
edid mode
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C
Out D
Out E
Out F
Out G
Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
SETUP
B
asic Oper
ation
B
asic Oper
ation