Gefen EXT-UHD600A-88, Руководство пользователя

Страница: 18 / 232

page | 6
Introduction
Ge
tting S
tar
ted
Ge
tting S
tar
ted
ID Name Description
5 Input buttons (1 - 8) Press these buttons to select the desired
input when performing routing operations.
Each button corresponds to an In port
(1 - 8) on the rear panel of the matrix.
6 Off Press this button to block an input.
See Turning Off Inputs (page 26) for
more information.
7 Lock Press this button to toggle between locking
and unlocking the buttons on the front
panel.
8 OK Press this button to accept the current
selection in the menu system.
9 Preset Press this button to select the desired
preset. See Routing Presets (page 78)
for more information.
10 Mask Press this button to mask the desired
output.
11 Volume Adjusts the output volume on the selected
output. See Adjusting the Output Volume
(page 21) for more information.
12 Mute Press this button to mute the audio on the
selected output. See Muting and Unmuting
Audio (page 23) for more information.
13 Power Press this button to toggle power on the
matrix.
14 DIP switches Sets the IR channel of the IR remote
control. In order for the IR remote control
to communicate with the matrix, both the
IR remote control and the matrix must be
set to the same IR channel. See Setting
the IR Channel (page 9) for information
on setting the IR channel of the IR remote
control. Use the front panel controls to set
the IR channel of the matrix. See Setting
the Matrix IR Channel (page 62) for
information on setting the IR channel of the
matrix.