Gefen EXT-UHD600A-88, Руководство пользователя

Страница: 35 / 232

page | 23
B
asic Oper
ation
B
asic Oper
ation
Muting and Unmuting Audio
The audio for each output can be muted from either the front panel, using the included IR
remote, or through the built-in web interface. The Mute button is used for both muting and
unmuting audio on the desired output.
1. Go to the routing screen . If the routing screen is not displayed, then press the
Back button on the front panel or on the IR remote control until the routing screen
is displayed.
2. Press the Mute button on the IR remote control. The front panel display will prompt
for the output to be adjusted.
3. Select the desired output by pressing the
desired Output button (A - H) on the
upper-portion of the IR remote control.
If the output is not muted, then the following
screen will be displayed:
If the output is muted, then the following screen
will be displayed:
OK
Output
RMT-88A
Menu
Back
Down
Up
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D Mute
E F Volume
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
MUTE
SELECT OUTPUT
MUTE: OUTPUT B NAME
PRESS MUTE to MUTE
MUTE: OUTPUT B NAME
PRESS MUTE to UNMUTE
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C Out D Out E Out F Out G Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
out a :output a
A/V In:input 01
Mute button
Output buttons