Gefen EXT-UHD600A-88, Руководство пользователя

Страница: 30 / 232

page | 18
When the matrix is shipped from the factory, the matrix is set to “one-to-one” routing
mode. This means that Input 1 is routed to Output A, Input 2 is routed to Output B,
Input 3 is routed to Output C, and so on. To change the routing state for any output,
follow the instructions below.
Using the Front Panel
1. Go to the routing screen . If the routing screen is not displayed, then press and
release the Back button until the routing screen is displayed.
2. Select the desired output by pressing and releasing the ▲ or ▼ buttons.
These buttons will glow blue when they are pressed.
Example: We have a 4K Ultra HD source connected to In 4 (Input 4)
and we want to view the source on the 4K Ultra HD display that is connected to Out G
(Output G).
The first thing we need to do is use the ▲ or ▼ buttons until Output G is
displayed. Currently, Input 7 is routed to Output G. We need to change it to
Input 4.
3. Press the Enter button.
4. An arrow cursor will be displayed next to the input. This indicates that input
can now be changed.
B
asic Oper
ation
B
asic Oper
ation
B
asic Oper
ation
B
asic Oper
ation
out G :output G
A/V In:input 07
out B :output B
A/V In:input 02
out G :output G
>
A/V In:input 07
Routing Inputs to Outputs
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C Out D Out E Out F Out G Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
out a :output a
A/V In:input 01