![GEA Niro Soavi One7TS Скачать руководство пользователя страница 184](http://html1.mh-extra.com/html/gea/niro-soavi-one7ts/niro-soavi-one7ts_instruction-manual_572298184.webp)
Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
07C100-7C0
GEA Niro Soavi
182
SHEET H
PNEUMATIC PLANT
GENERAL INFORMATION
The actuation force required to close the homogenizing valve and achieve the operating pressure is
applied by a pneumatic cylinder with compressed air in the upper chamber.
The actuator does not require regular maintenance, but should be protected against high temperatures
(which can damage its gaskets) and corrosive fluids, since it is made in aluminium and stainless
materials.
Should the actuator malfunction it is advisable to replace it; in any case there is a gaskets kit available
as a spare part, supplied on request by directly contacting the Spare Parts Department of
GEA Niro
Soavi S.p.A
.
The figure shows a schematic diagram with one stage with local manual adjustment on the machine's
control panel.
A diagram of the system actually installed on the machine is enclosed with chapter 11 "SPARE
PARTS CATALOGUE"; refer also to the flow-sheet (P&ID) also enclosed with chapter 11 of this
manual.
FIG. 7-36
Содержание Niro Soavi One7TS
Страница 2: ......