Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
01C100-1C0
GEA Niro Soavi
16
1.10. Instructions for request actions
Request for interventions by Customer Technical Service should be sent via fax to the following address:
GEA Niro Soavi
Via Da Erba Edoari, 29 - 43123 - PARMA (Italy) - Tel39 0521 965411,
Fax +39 0521 242819, e-mail: [email protected], http//www.niro-soavi.com:
• type of machine, serial number, installation year;
• fault detected;
• exact address of the premises where the machine is installed.
1.11 Instruction for ordering spare parts
For the method of ordering spare parts, see chapter 10, points 10.1 and 10.2.
1.12 Operator characteristics and language used
To understand the instructions (text and figures) the machine operator must have (or acquire, by
proper education and training) at least the following characteristics:
• Enough general knowledge and technique to read and understand the manual content in the
parts of their concern and to correctly interpret the layout and diagrams.
• Ability to understand and interpret the symbols, pictograms and video messages.
• Knowledge of the main hygienic, accident prevention and technology standards.
WARNING:
The responsible person of the safety in the Customer premises must:
• check that the knowledge possessed is in fact sufficient for reading and full
understanding of the manual;
• performing proper practical training and ensuring, even by a test, that the operators
have the capacity to operate the machine correctly and safely, both in normal operation
and emergency situations.
WARNING:
The operators must not carry out operations reserved for maintenance persons or qualified
technicians.
The manufacturer is not liable for damages deriving from the failure to adhere to this
prohibition.
Содержание Niro Soavi One7TS
Страница 2: ......
