Operating
Connecting the spreader
2018-9015-003
03-2015
● The PTO driveline meets local requirements;
8.4
Connecting the spreader
Step 1: Hitching the spreader
Warning!
Connect the hydraulic hoses properly to ensure safe operation. Refer
to section Appendix - Hydraulic diagram.
Attention!
The spreader must be towed by the tractor for which it was designed.
When changing tractor, the spreader draw bar must be adjusted. Refer
to your authorized dealer for more information.
● Using the jack (1), position the
spreader draw bar to allow
connecting the tractor.
● When the spreader is connected,
the jack must be placed on the
transport support (2).
2
1
● If using a hydraulic jack (3), connect
the hydraulic hoses to the tractor
and adjust the spreader draw bar
height.
3
