manualshive.com logo in svg

GEA EL44, Инструкция по эксплуатации и руководство по установке

Поделиться
Скачать
GEA EL44 Скачать руководство пользователя страница 11

Preface

GEA Farm Technologies Canada Inc. / Division GEA Houle - general equipment warranty

2018-9015-003
03-2015

11 / 148

1.5.4

Warranty limitations and exclusion

NO WARRANTY, ORAL OR WRITTEN, EXPRESS OR IMPLIED, OTHER
THAN THE ABOVE WARRANTY IS PROVIDED IN RESPECT OF THE
EQUIPMENT SOLD.

Some states (or jurisdictions) do not allow the exclusion of implied warranties
so it is possible that this limitation may not apply.

THE COMPANY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY, ADAPTABILITY OR OF
PERFORMANCE, PROVIDED THAT SUCH EXCLUSION OF LIABILITY
COMPLIES WITH THE LAWS HAVING APPLICABLE REGULATORY
JURISDICTION.

THE LIABILITY OF THE COMPANY AND ITS DEALERS UNDER THIS
WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE
PARTS UP TO THE CONTRACT VALUE FOR THE PURCHASED
EQUIPMENT. IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY
SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL, PUNITIVE OR
EXEMPLARY DAMAGES IN ANY KIND OR CHARACTER, INCLUDING
INDIRECT COSTS, LOSS OF PRODUCTION, LOSS OF REVENUES OR
PROFITS, AND OTHER DISBURSEMENTS WHICH MAY OCCUR.

Some states (or jurisdictions) do not allow the exclusion or limitation of
incidental or consequential damages and so it is possible that these limitations
or exclusions may not apply.

1.5.5

General statements

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS THAT VARY BY JURISDICTION.

THE DEALER IS NOT AUTHORIZED TO MAKE ANY ADDITIONAL
REPRESENTATIONS OR PROMISES THAT DIFFER IN ANY WAY FROM
THE TERM OF THIS LIMITED WARRANTY, OR MODIFY THE PROVISIONS,
DURATION AND CONDITIONS OF THIS LIMITED WARRANTY.  NO WAIVER
OR MODIFICATION OF THIS LIMITED WARRANTY IS VALID UNLESS
AGREED TO IN WRITING AND SIGNED BY THE AUTHORIZED
REPRESENTATIVES OF THE COMPANY.

IN THE EVENT OF ANY CONFLICT BETWEEN THE ENGLISH LANGUAGE
VERSION AND ANY OTHER TRANSLATED VERSION OF THIS LIMITED
WARRANTY (WITH THE EXCEPTION OF THE FRENCH LANGUAGE
VERSION) THE ENGLISH VERSION SHALL PREVAIL.

Содержание EL44





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды