!
!
!
Assembly
Hydraulic suspension adjustments
2018-9015-003
03-2015
6.6
Wheel assembly
Attention!
Lift the spreader before installing the wheel. Refer to the section
Handling - Lifting the spreader.
Attention!
To lift the wheels, use a lifting device with a minimum lifting capacity
of 500 kg.
Attention!
Torque wheel nuts to 508 NM.
Refer to section Technical data - Tire specifications.
● Check the air pressure inside the tire.
● Lift the tire and position it on the
wheel hub.
● Install ten wheel nuts and tighten to
508 NM following the sequence
illustrated.
● After tightening all nuts, double
check the torque for safety.
● Repeat these steps for each wheel.
● Lower the spreader on the ground.
● Place wheel chocks on a wheel, one at the front and the other at the back
of the wheel, to secure the spreader.
● Proceed with the remaining assembly steps.
6.7
Hydraulic suspension adjustments
The hydraulic suspension is lowered for transport purposes, it therefore
requires adjustment.
Note!
Refer to section Advanced maintenance - Hydraulic suspension.
