Assembly
Power steering - Control valve plug
2018-9015-003
03-2015
6.8
Power steering - Control valve plug
Attention!
Since tractors can be equipped with an open or a closed hydraulic
system, the control valve must be set with the appropriate plug to avoid
overheating/damaging hydraulic components. Contact your tractor
dealer.
Use the appropriate plug in order to
match the tractor hydraulic system:
● The standard plug (1) is required for
tractor equipped with an open
hydraulic system.
● The beyond plug (2) is required for
tractor equipped with a closed
hydraulic system also called load
sensing in some cases.
2
1
Note!
A new equipment always comes with two plugs, a standard plug
installed on the valve and a beyond plug supplied separately. Make
sure to install the appropriate plug.
Plug change
Attention!
Oil leak will occur when changing the plug.
Note!
Make sure the spreader and the tractor wheels are perfectly aligned
before adjusting the control valve.
● Apply Teflon tape on the threads of the beyond plug (2). Do not apply Teflon
tape on the tip of the plug.
● Unscrew the standard plug (1) and replace immediately by the beyond plug (2).
