– 33 –
Fresh Food/Wine Reserve Door
Door removal is considered a 2-person job due to
the weight of the door and the alignment needed
when installing the door.
Caution:
The articulating door hinges incorporate
a substantial tension spring. It is important when
removing or replacing the door to release the
tension from the top and bottom hinge springs.
To remove the fresh food or wine reserve door:
1. Open the door.
WARNING:
The following step is important for safe
handling of an unloaded hinge.
2. On both the top and bottom hinges, turn the
T-20 Torx screw counterclockwise until the
screw aligns with the right side of the notch.
(Spring tension released, position 0 )
3. Close the door.
Note:
In the following steps, have someone hold the
door in the closed position.
4. Remove the two T-30 Torx screws that attach
the door to the bottom hinge.
5. Remove the two T-30 Torx screws that attach
the door to the top hinge.
To install the fresh food or wine reserve door:
Note:
In the following steps, have someone place
and hold the door in the closed position.
1. Install the two T-30 Torx screws that attach the
door to the top hinge.
2. Install the two T-30 Torx screws that attach the
door to the bottom hinge.
3. On both the top and bottom hinges, turn the
T-20 Torx screw clockwise until the screw aligns
with the left side of the notch. (Spring tension
applied, position l )
Spring tension released position
Spring tension applied position