4400_0060
enFlow Service Manual Rev. F 04/12
Page 3 of 36
Symbols Used on the Equipment
Symbol
Symbol Description
Symbol
Symbol Description
The following symbols may be viewed on the any of the products or accessories that comprise the enFlow IV Fluid/Blood Warming System.
Batch Code
On
Catalog Number
Off
Serial Number
Not made with natural rubber latex
National Stock No. (US Military)
Expiration Date
Single Use Only; Do Not Re-Use
Direct Current
Sterilized Using Irradiation
Alternating Current
Keep Dry
Type BF applied part, defibrillation-proof
Do Not Re-Sterilize
Do Not Use if Package is Damaged.
ATTENTION
Fuse
Temperature; Thermometer
Non-Pyrogenic
Danger High Voltage
Note
This symbol indicates that additional information is
being provided.
Electric Energy
Effect or action in both directions away from reference
point. (Open)
Storage Temperature Range
Effect or action in both directions towards a reference
point. (Close)
Di(2-ethylhexyl) phthalate Free
In transport applications it is advised to cushion and
insulate the Warmer from the patient’s skin and apply
the Warmer as loosely as acceptable checking regularly
for signs of potential pressure related injury.
Manufacturer
IP67
Degree of protection provided by enclosure, dust tight,
temporary water immersion
IP21
Degree of protection provided by
enclosure, no ingress of object > 12.5
mm diameter, protected against
dripping water
IP68
Degree of protection provided by enclosure, dust tight,
continuous water immersion
Caution: U.S. Federal law restricts this
device to sale by or on the order of a
physician.
TUV Rheinland of North America, Inc. is accredited by
OSHA as a NRTL, as well as by the Standards Council of
Canada. This mark indicates that the product has been
tested to UL 60601-1:2003 R6.03, CAN/CSA-C22.2 No.
601.1-M90, IEC 60601-1-1:2000, and IEC 60601-1-
4:2000.
Consult Instructions for Use
Do not encase the Warmer with any external coverings
like: towels, sheets, blankets or drapes. Covering the
Warmer restricts the natural convection of heat.
