GE TLE 160 Скачать руководство пользователя

Страница: 4 / 91

Critical Power

Modifications reserved

Page 4/91

GE_UPS_USM_TLE_SUL_M16_M50_2bU_V010.docx

User Manual

TLE Series 160 - 500 UL S2B

Preface

Congratulations on your choice of a TLE Series Uninterruptible Power Supply (UPS).

It will help eliminate load disturbances due to unexpected power problem.

This User Manual describes the function of the UPS module, the purpose and location of

the switches, the meaning of the system events related to the front panel indication, and

provides procedures for starting and stopping the equipment.

Please refer to the accompanying Installation Guide, which describes how to prepare the

installation site, and it provides weight, dimensions and procedures for moving, installing

and connecting the UPS.

While every care has been taken to ensure the completeness and accuracy of this manual,

assumes no responsibility or liability for any losses or damages resulting from the use

of the information contained in this document.

WARNING!

TLE Series 160 – 500

is a Category C3 UPS Product (according to IEC 62040-2).

This is a product for commercial and industrial application in the second environment −

installation restrictions or additional measures may be needed to prevent disturbances.

We recommend that this manual be kept next to the UPS for future references.

If any problems are encountered with the procedures contained in this manual, please

contact your GE Service Center before you proceed.

This document shall not be copied or reproduced without the permission of GE.

Some of the information contained in this manual may be changed without notice to

reflect technical improvements.

Safety instructions

Read the safety instructions contained on the following pages carefully before the

installation of the UPS, options and battery system.
Pay attention to the rectangular boxes included in the text:

They contain important information and warning concerning electrical connections and

personnel safety.

Parallel System version secured with RPA

When included in the text, this symbol refers to operation needed

only for RPA Parallel System.

Содержание TLE 160




























































































Результаты поиска

Содержание TLE 160

Отзывы:

Похожие инструкции для TLE 160

Бренды по названию

Популярные бренды

GE TLE 160, Руководство пользователя

Результаты поиска

Содержание TLE 160

Отзывы:

Похожие инструкции для TLE 160

Бренды по названию

Популярные бренды